Movie
SWD Series
After washing, containers are dried all at once using hot air blowing at a speed similar to that of a jet plane!
Is This Possible?
Optional Products to Meet Needs
- When having one person to do the washing…
-
Return Conveyor
Attaching a return conveyor at the exit of the washer makes it easy for one worker to load and unload.
- When you want to reduce running costs… this reduces the amount of fuel used!
-
Isolation Chamber
Doubled metal sheet, and filled insulation material between them. Thermal efficiency is improved by reducing heat radiation from metal sheet.
Wastewater and exhaust heat recovery device
Warming up using water by heat recovery from wastewater.
- When you want to reduce running costs… this reduces the amount of water used!
-
Filtration system (compatible with outer box washers only)
Water that would normally be discharged is filtered and recycled as reclaimed rinse water.
Filtering and reusing the water can reduce the amount of water used in a normal washing machine, about 25 liters each wash, by about a third.
Not only does this machine reduce water and sewage costs, but also reduces the amount of fuel needed for heating.
Filtration Device
After rinsing, water is filtered, and when the filter gets clogged with impurities, a new filter is sent automatically.
30 Mesh Strainer
A simple filtration device.
Filtration is made possible through the fine mesh of the strainer.
Sand Filtration Device
Fine sand is used to filter water used for rinsing, saving water and reducing steam usage.
- When you want to reduce time and effort required for cleaning inside the washing machine…
-
Automatic Self Cleaning Device
Capable of cleaning chamber inside easily by pushing a button.
- When removing shipping labels is hard work…
-
Label Peeler
Labels that are difficult to remove manually are thoroughly removed using high-pressure water.
Plunger Pump
A pump that discharges high-pressure water to remove labels.
Label Peeling Nozzle
High-pressure jets sprayed from the plunger pump thoroughly remove labels.
Label-Scraping Strainer
A strainer that ejects labels removed by the label remover from the machine.
[ Manual ]
[ Automatic ]
Automatic Net Filter
Small, pulverized label remnants that have passed through the strainer are further filtered through a net.
The filter comes with automatic reverse cleaning.
- An automated device for increased processing capacity
-
Material handling before and after washing
A conveyance system that achieves both high-volume processing and automation. Products are available based on your needs.
-
Cart Transfer
❶ Cart Transfer
Containers stacked on a cart are taken from the cart and placed on a conveyor belt.
-
Lifter
❷ Lifter
Stacked containers are lifted to the height of the conveyor belt.
-
Unstacker
❸ Unstacker
Stacked containers are unstacked one by one.
-
Backward Entrance Conveyor
❹ Backward Entrance Conveyor
Containers that are face-up on the conveyor belt are flipped face-down.
-
Washing
❺ Washing
High volumes of low-pressure water remove grime.
-
Backward Exit Conveyor
❻ Backward Exit Conveyor
Containers that have been washed face-down are flipped face-up.
-
Pre-stacker
❼ Pre-stacker
Containers are stacked at a set height before they are fed into the spin dryer.
-
Dehydration
❽ Dehydration
Centrifugal spin drying removes water droplets from inside and outside surfaces.
-
Stacker
❾ Stacker
Washed, centrifuged, and dried containers are stacked to a predetermined height.
-
Lifter
❿ Lifter
Containers are lowered from the height of the conveyor belt to the height of a cart.
-
Cart Transfer
⓫ Cart Transfer
Stacked containers are loaded onto the cart.
-
Cart Transfer
