Clean Cut King

For washing large or special size containers.
Customization is available upon request.


Clean Cut King
  • This is a made-to-order product, meaning customization is available upon request.
    ⇨ Size or height can be increased.
  • A swing nozzle is used in the lower section for powerful washing.
  • Equipped with a rinse tank and pump for thorough rinsing.
  • The container is held down automatically when washing starts.
  • Options such as double container washing and an electric water heater can be added.
  • Swing Nozzle
  • Tank Rinse Pump
  • Automatic Holding

Specifications

Model Name Clean Cut King
Processing Capacity (units/hour) 60-120
Dimensions Width (mm) 1100
Depth (mm) 1195
Height (mm) 1790
Container Dimensions (Max.) 700×500×350H
Container Dimensions (Min.) 330×330×70H
Total Electrical Capacity 3P200V (kW) 4.65
Equipment Power Supply Wash Pump 3.7
Rinse Pump 0.75
Rack Motor 0.2
Water Consumption (L/Session)
(Required Water Pressure: 0.1 to 0.2 Mpa)		 Initial 120
5.5
Steam volume (kg/hour) (at 0.4Mpa-G) 60
External Connection Water Supply 20A T-pipes joint stopper
Drainage 40A T-pipes joint stopper
15A joint stopper
Steam 20A Flange stopper
“Electricity Terminal block stopper

* Water consumption and steam volume vary depending on the rinse time settings.

* High-temperature washing generates a large amount of steam. An exhaust hood or exhaust fan is required.

* Dimensions, specifications, appearance, and other aspects of the product may be changed for improvement purposes.

GO TO
TOP