Painstaking manual work is no longer needed.
Washing will become an easy task to be done in a short period of time.
Water consumption and
labour cost can be saved.
- Advanced washing power
- Washing nozzles are placed up, down and lateral sides of the machine.
Rack rotation during washing will prevent uneven washing results.
- The machine itself is easy to wash.
- As the tanks are slanted and their corners are rounded, drainage water and dirt would not easily accumulate. Tanks have no gap between them.
Specifications
| Model name | Utensil Washer TACT | |
|---|---|---|
| Washing capacity (time/hour) (*1) | 18 | |
| Dimension (Main Body) | Width (mm) | 1342 |
| Depth (mm) | 1300 | |
| Height (mm) | 1570 (2170 in case of door open) | |
| Washing room effective dimension | φ850 (actual dimension)×450H | |
| Total capacitance 3P200V (kW) | 4.55 | |
| Power supply (kW) | Washing pump | 3.7 |
| Rinsing pump | 0.75 | |
| Rack motor | 0.1 | |
| Water consumption (L/time) (*2) | 20 | |
| Steam volume (kg/h:0.4MPa-G) (*2) | 60 | |
| External connection | Water supply connection: Union coupling | 20A |
| Tank drainage connection: T-pipes | 40A at 2 places | |
| Steam connection: Flange | 20A | |
| Electricity: with terminals on the board | ||
(*1) The capacity is calculated assuming as 120sec. washing, 20sec. rinsing, and 60sec.in-out of washing objects.
Washing and rinsing time can be set as any time length.
(*2) Water and steam consumption would differ depending on rinsing time setting. The above figure is rough one assuming rinsing time as 20 sec.
* Specifications may be changed for further improvement of the product or for other reasons.
* Relative humidity of exhaust steam is 90% or more. Please take this into account at the time of construction.
